Aristopetss
433MHz EV1527 Outdoor Wireless 2 PIR Motion Sensor Pet Immune 20KG with Tamper Switch for Intrusion Burglar Alarm System
433MHz EV1527 Outdoor Wireless 2 PIR Motion Sensor Pet Immune 20KG with Tamper Switch for Intrusion Burglar Alarm System
Couldn't load pickup availability
SPECIFICATIONS
Anti white light: >10000 Lux
Brand Name: NoEnName_Null
Certification: CE
Hign-concerned Chemical: None
Model Number: OUT-400-C
Origin: Mainland China
Product name: Wireless PIR Motion Sensor
Smart home platform: other
Wireless distance: 200m (open space)
code: EV1527
detecting angle: 108 degrees
detecting distance: 12m*12m
frequency: 433mhz
pet immune: 20KG
waterproof: IP65
433MHz EV1527 Outdoor Wireless 2 PIR Motion Sensor Pet Immune 20KG with Tamper Switch for Intrusion Burglar Alarm System
Note:
This sensor can't work alone. it needs to work with the alarm host. The default version is 433mhz EV1527. Pls help to check if your alarm host support 433mhz EV1527. and we need to know your alarm panel's resistance number.please contact me, and show me your alarm panel. we need to know what's your alarm penel and need to help you to check if it's suitable or not.
Introduction:
Installation:
In order to optimize the signal coverage, the detector should be mounted at 2.1m height and vertically adjusted to zero point. Make sure there are no interference sources working near the detector and that there is a wide field of view in front of the detector. Unscrew, remove the front cover, and pull out the circuit board. Drill through the mounting blind hole, make a mark on the wall, drill a 40mm deep hole with a 6mm diameter drill bit, then punch the rubber plug into the hole, let the screw into the 5-6 mm, then thread the wire through the cable hole, and fix the bottom cover to the wall, finally tighten the screw.
Product Show:
Share

















